Installing the Dell Scanner for Windows 10

Just in case you are facing scan issues after installing Windows 10 or after you have performed a Windows 10 update then the defective driver, the corrupted system file or even the incorrect service configuration could be the reason. You could try to resolve these issues by using the following methods. If you are not able to do so, on your own you could also contact on the Dell Scanner Support Number for assistance.
Dell Scanner Support Number
Solution 1: Repair Corrupted System Files:-
 If the corrupted system files are the reason, you can follow the below mentioned steps:

•   You need to hold down Windows logo along with pressing the R key. A Run dialog box would come up.
•   Type cod command in the run box then click on OK button.

•   Command prompt will open, type sfc/scannow in the box and press Enter.

This process might take few minutes up until the verification is complete. Once the process is complete you will find out the corrupt files that are causing the scanner connection issues.

Solution 2: Configure Related Services:-

If some related services do not begin the scanner cannot work properly. Here are some of these services:

•    Remote Procedure Call RPC

•    DCOM Server Process Launcher

•    RPC Endpoint Mapper

•    Shell Hardware Detection

•    Windows Image Acquisition (WIA)

Check the configuration of these services thoroughly to ensure that the scanner works properly.

Solution 3: Update Driver for Your Scanner:-

If the scanner driver is having problem, the scanner cannot scan correctly. So updating the driver may resolve the problem.

You can get instant help by dialing on the Dell Scanner Support Number: 1-888-296-9079.  The experts on the other end are always there to resolve your technical issues.


Popular posts from this blog

All You Want to Know About Dell Printer Support